What Is COSHH?
COSHH stands for the Control of Substances Hazardous to Health. The COSHH Regulations 2002 are the UK law that deals with substances at work that can damage your health, from the dust you create chasing a wall to the solvent cement you use on PVC conduit.
This post is based on a short introductory video from the Spark Speak channel. The video is in Hindi, so the quotes below are our English translations. It sums up the purpose of the regulations like this:
“The requirement is on employers: they must control substances that are hazardous to health, and the exposure of workers must either be prevented or reduced.”
COSHH sits underneath the Health and Safety at Work etc. Act 1974 (HASAWA), which places the general duty on employers to protect their workers. COSHH spells out how that duty applies to hazardous substances.
For the ECS HS&E test, COSHH falls within the Health and Hygiene topic. If you want more background, see our COSHH hazardous substances guide for electricians.
What COSHH Requires Employers to Do
The video lists the steps an employer must take to prevent or reduce exposure:
- Find out what the health hazards are for the work being done.
- Decide how to prevent harm by carrying out a risk assessment.
- Provide control measures to reduce the risk.
- Make sure the control measures are used by the people on site.
- Keep control measures in good working order.
- Provide information, instruction and training to employees.
- Provide monitoring and health surveillance in appropriate cases.
- Plan for emergencies.
Employees have duties too. You must use the control measures provided, follow your training, and report any defects in equipment such as extraction or respiratory protection.
Which Substances Are Hazardous to Health?
The list is broader than most people expect. According to the video, COSHH covers:
- Chemicals
- Products containing chemicals
- Fumes
- Dusts
- Vapours
- Mists
- Nanotechnology (nanomaterials)
- Gases and asphyxiating gases
- Biological agents
- Germs that cause disease
On an electrical job, that could mean:
- Silica dust from chasing or drilling brick, block and concrete
- Solvent adhesives and cleaners
- Solder fumes
- Expanding foams, sealants and resins
- Bird droppings in lofts and plant rooms
Note that asbestos and lead are not covered by COSHH. They have their own regulations: the Control of Asbestos Regulations 2012 and the Control of Lead at Work Regulations 2002. Our post on asbestos awareness for electricians covers asbestos in more detail.
What You Need to Know Before You Start an Assessment
Before you fill in a COSHH assessment, the video says you need answers to three questions:
- Which substances in your work are hazardous to health?
- How can they cause harm? Think about breathing them in, skin contact, swallowing and eye contact.
- How can the risk of harm be reduced?
It helps to walk through the job from start to finish. Include substances the work creates, such as dust and fumes, as well as products that come in a labelled container.
Prevent Exposure First
The first aim of COSHH is to avoid the hazardous substance altogether. Control measures come second. The video gives three ways to prevent exposure, each with a practical example.
Use a safer process.
“If something is solvent-based and we use a water-based product instead, that is a little safer. And if we brush instead of spraying, there is less chance of breathing it in.”
Use a safer substitute. Swap the product or the method for a less harmful one. The video’s example is cleaning up: use a vacuum cleaner in place of a brush, because sweeping throws dust back into the air.
Use a safer form. The same substance can be less hazardous in a different form. A solid may be safer than a liquid, and a waxy solid produces far less dust than a powder.
When You Cannot Prevent Exposure, Control It
Where exposure cannot be avoided, it must be adequately controlled. The video highlights three checks:
- Control measures are applied and in good working order. This covers extraction, on-tool dust capture, ventilation and any other measure you rely on.
- Exposure is below the Workplace Exposure Limit (WEL). WELs are the legal limits on airborne concentrations, published by the HSE in document EH40.
- Exposure to substances that cause cancer or asthma is reduced as low as is reasonably practicable. Staying just under the limit is not enough for these substances.
Personal protective equipment is the last line of defence. It comes after safer processes, substitution and engineering controls. Where PPE is needed, our complete PPE guide for electricians explains how to choose and maintain it.
How to Prepare a COSHH Assessment
The video breaks the assessment into three steps:
- Identify the hazards. List every hazardous substance used or created by the task.
- Decide who might be harmed and how. Consider how harmful each substance is and how people could be exposed. Include other trades and anyone nearby.
- Evaluate the risks and decide on precautions. Compare what you already do with what is needed, then set out the control measures.
Most of the information you need comes from the safety data sheet (SDS), which the video also calls the MSDS (material safety data sheet).
“This MSDS, or safety data sheet, is available from the manufacturer, or you can download it from the website. With its help, you can complete the COSHH assessment in full.”
The safety data sheet is not the assessment itself. It tells you what the product can do to you. The assessment records how you are using it on this job, for how long, in what space, and what you will do to control the risk.
Good practice is to record the significant findings, brief everyone involved, and review the assessment whenever the work or the product changes. Our post on COSHH awareness, forms and hazard symbols covers the label symbols you will see on data sheets.
Key Points for the ECS HS&E Test
- COSHH means the Control of Substances Hazardous to Health, and the current regulations date from 2002.
- The main duty is on the employer to prevent or adequately control exposure.
- Prevention comes first: change the process, substitute the product, or use a safer form.
- Hazard information comes from the manufacturer’s safety data sheet.
- Exposure must be kept below the Workplace Exposure Limit.
- Employers must provide information, instruction and training, plus health surveillance where appropriate.
How Sparky Safety Can Help
COSHH questions come up in the Health and Hygiene section of the ECS HS&E test, and they are easy marks once you understand the principles.
The Sparky Safety app helps you revise with:
- 300+ ECS HS&E practice questions across all 11 topics, including Health and Hygiene
- Mock tests that mirror the real test format
- Study guides that explain the reasoning behind each answer
- Reference guides for quick revision on site or on the go
- 10 BS 7671 calculators for your day-to-day electrical work
Download the Sparky Safety app and build your COSHH knowledge alongside the rest of your HS&E revision.