What Is COSHH?
COSHH stands for the Control of Substances Hazardous to Health Regulations 2002. It is the main UK law covering chemicals and other hazardous substances at work, and it sits under the wider Health and Safety at Work etc. Act 1974 (HASAWA). In simple terms, COSHH requires employers to prevent or reduce workers’ exposure to substances that may be harmful to their health.
The video makes the point that other countries have their own versions under different names. Australia talks about “managing risks of hazardous chemicals”, the USA about “chemical hazards and toxic substances”, and Ireland about “chemical agents and carcinogens”. The principles are much the same everywhere, but if you’re working towards an ECS card, COSHH is the one you need to know.
COSHH comes up under the Health and Hygiene topic of the ECS HS&E test. It’s also something you’ll deal with on almost every job, whether you notice it or not.
Hazardous Substances Aren’t Just Rusty Drums
Ask most people to picture a “hazardous substance” and they’ll imagine a leaking barrel in an abandoned warehouse. The video says it plainly:
“The reality is that chemical and hazardous substances can come in a range of different physical forms.”
For an electrician, the most dangerous substance you meet in a week might be the dust coming off your SDS drill as you chase a wall, not anything in a labelled container. Recognising the different forms is the first step to controlling them.
The Main Forms of Hazardous Substances
Liquids
Liquids are what most people think of first. On a typical site they include:
- Cleaning products and degreasers
- Fuels for generators and plant
- Pesticides
- Process chemicals
- Liquefied gases
Dusts
Dusts are tiny dry particles suspended in the air. They can come from wood, concrete, brick, glass, grain and even flour. The key point for electricians is this:
“Dusts can be created by a number of very common work activities such as cutting, drilling, grinding and sanding.”
Chasing walls, coring through blockwork and cutting cable trays all produce dust. Concrete and brick dust contains respirable crystalline silica, which can cause silicosis and lung cancer. That’s why on-tool extraction, water suppression and properly fitted RPE matter so much.
Gases, Vapours, Mists and Fumes
People often mix these four up, so here’s what makes each one different:
- Gases: molecules in constant random motion, usually invisible. In commercial settings they are often stored under high pressure, which brings extra risks. Always know exactly which gas or gas mix you’re dealing with before you use it.
- Vapours: the gas phase of a substance that is normally a solid or liquid at room temperature. Water vapour is the simple example. On site, the main worry is solvent vapours given off by adhesives, glues, paints and inks.
- Mists: tiny liquid droplets suspended in the air, for example from trigger sprays, aerosol cleaners or hand dispensers.
- Fumes: a mixture of gases and fine particles formed when a solid is heated, for example during welding or soldering. Some fumes are carcinogenic, so strict control measures such as local exhaust ventilation are needed.
Exam tip: if a question asks which form usually results from heating a solid (such as welding), the answer is fume.
What Decides How Harmful a Substance Is?
Two people can use the same product and face very different levels of risk. When you judge the potential for harm, look at:
- The product itself and its characteristics
- The quantity being used and the form it’s in
- The type of use: spraying, brushing, heating, cutting
- Routes of exposure: breathing it in, skin contact, swallowing, getting it in the eyes
- How long and how often someone is exposed
- Control measures in place: system or process design, filtration, ventilation and personal protective equipment (PPE)
PPE comes last on that list for a reason. Under the hierarchy of control, you should eliminate or substitute the substance first, then use engineering controls such as extraction, and only rely on PPE when exposure can’t be controlled any other way. Our Complete PPE Guide for Electricians explains how to choose and use RPE, gloves and eye protection properly.
How to Tell If a Substance Falls Under COSHH
The simplest check is whether there’s a safety data sheet (SDS). If a product falls into one of the hazard classes of the Globally Harmonised System (GHS), the manufacturer or supplier must provide one. In the UK, GHS is put into effect by the GB CLP Regulation.
“If there’s a safety data sheet then there is potential harm from the material and it ain’t so harmless after all.”
Hazard Pictograms
GHS hazard classes are shown by red-bordered diamond pictograms, each one linked to a specific type of harm: flammable, corrosive, toxic, harmful/irritant, serious health hazard, oxidising, explosive, gas under pressure and hazardous to the environment. Learn to recognise them, because they come up in the test and you’ll see them on site.
What You’ll Find on an SDS
A safety data sheet should tell you:
- The hazard classes that apply to the product
- Precautionary statements about the harm it can cause
- First aid measures
- Firefighting measures
- The PPE to wear when using it
- Safe handling, storage and disposal information
Don’t Forget the Label
The SDS isn’t the only source of information. Most products carry the hazard pictograms on the label, along with short first aid instructions and warnings. The video gives a practical tip:
“Make sure your chemicals are retained in their original packaging and if they’re taken out of it put a label on it with the important information on it.”
Decanting a cleaner into an unmarked bottle, or worse a drinks bottle, is a common way accidents start.
The COSHH Assessment
The central duty under COSHH is the COSHH assessment (Regulation 6). It’s a structured review of:
- The hazardous properties of each substance used in the workplace
- How each substance is used in your actual work practices
- Any interactions between different hazardous substances
- The control measures needed to prevent harm to health
COSHH assessments can be standalone documents, but it often works better to link them to your existing risk assessments and method statements, so the people doing the work see the controls where they need them.
“At the end of your COSHH assessment it should be very clear as to which hazardous substances you use within your workplace, how they should be used within that environment and of course what control measures should be in place to make sure no one comes to harm.”
Beyond the assessment, COSHH also requires employers to:
- Prevent or adequately control exposure, keeping within any Workplace Exposure Limits (WELs) published in HSE’s EH40
- Maintain control measures: local exhaust ventilation (LEV) must be thoroughly examined and tested at least every 14 months
- Monitor exposure and provide health surveillance where needed
- Give workers information, instruction and training
- Plan for accidents and emergencies
Note that asbestos and lead have their own regulations and are not covered by COSHH. If you work in older buildings, read our guide to asbestos in construction and how electricians can protect themselves.
Quick-Fire Revision Quiz
The video ends with three questions, and all three are typical of what you’ll see in the HS&E test:
- Which document must a manufacturer provide for a hazardous substance? A safety data sheet (SDS).
- Which form usually results from heating a solid, such as welding? Fume.
- What must a UK employer carry out to comply with COSHH? A COSHH assessment.
If you got all three, you have the basics. For more on how Health and Hygiene fits into the full syllabus, see What Is the ECS HS&E Test?
How Sparky Safety Can Help
COSHH questions turn up in the test every year: pictograms, SDS contents, fumes against vapours, and employer duties. The Sparky Safety app helps you get them right first time:
- 300+ ECS HS&E practice questions across all 11 topics, including Health and Hygiene, each with a full explanation
- Mock tests that match the real exam conditions
- Study guides that break down COSHH, PPE, asbestos and other key regulations in plain English
- Reference guides for fast revision of hazard pictograms, legislation and control measures
- 10 BS 7671 calculators for when you’re back on the tools
Download Sparky Safety today and go into your HS&E test knowing your COSHH inside out.